A hot water tank making noise is usually caused by sediment buildup, a struggling pressure relief valve, or high water pressure. Most noisy tanks are not an emergency right away, but the noise is a warning sign that something needs attention. If your tank is older than 10–12 years, the noise can also mean it’s close to the end of its life.
Mr Swirl The Friendly Plumber has been helping homeowners and businesses with hot water tank issues like this for over 25 years across Greater Vancouver and the Fraser Valley — including Vancouver, Burnaby, Coquitlam, Port Coquitlam, Port Moody, Surrey, Langley, Maple Ridge, New Westminster, Richmond, Delta, and Abbotsford. If you need a hand, we’re just a call away.
Let’s look at what the noise means, what you can safely check, and when it’s time to call a plumber.
What Does the Noise Mean?
Different sounds point to different problems. Here’s a simple guide:
| Sound You Hear | What It Likely Means | Is It Urgent? |
|---|---|---|
| Popping or rumbling | Sediment buildup at the bottom of the tank | Not urgent, but should be checked soon |
| Hissing or whistling | Pressure relief valve releasing pressure | Check soon — could mean high pressure |
| Banging or knocking in pipes | Water hammer, not the tank itself | Usually not urgent |
| Loud, ongoing noise from the tank itself | Aging tank, valve strain, or pressure issue | Call a plumber, especially if tank is 10+ years old |
| Tank leaking and making noise | Tank failure | Call a plumber right away |
Need Help With Your Water Heater?
Call Mr Swirl at 604-435-4664 or book online today for reliable 24/7 plumbing service.
Common Causes of a Noisy Hot Water Tank
1. Sediment buildup. Over time, minerals in your water settle at the bottom of the tank. When the tank heats up, water bubbles through this sediment layer. This causes popping and rumbling sounds.
2. A struggling pressure relief valve. This valve protects your tank from too much pressure or heat. If it’s working too hard, it can hiss, whistle, or even leak.
3. High water pressure. City water pressure that’s too high puts stress on your tank and its valve. This can cause noise and shorten the life of your tank.
4. An aging tank. Tanks usually last 10–12 years. As they get older, parts wear out and noise becomes more common.
Real Example From a Mr Swirl Service Call
Here’s a real example from one of our jobs in Greater Vancouver, so you can see how we handle a case like this.
We arrived at a home where the customer said there was a loud noise coming from the hot water tank. After checking the tank, we believed the noise was most likely coming from the relief valve. Since the tank was over 12 years old, we recommended replacing it instead of just repairing the valve — at that age, a tank is close to the end of its expected life, and a new valve alone often isn’t a long-term fix.
Here’s what we did, step by step:
- Drained the old tank safely
- Removed the old tank
- Installed the new tank
- Tested the new tank for leaks (none found)
- Connected the power
- Tested the water pressure coming from the tank — it measured 150 psi
- Explained the pressure reading to the customer
- Replaced the old pressure relief valve with a new one
- Turned the water back on and tested again for leaks (none found)
- Confirmed the water was starting to warm up before leaving
- Cleaned the work area






